#ANDROID AIRPORT UTILITY HOW TO#
#ANDROID AIRPORT UTILITY WINDOWS 10#

If it is lower, an iOS device is required. Note: If the printer firmware is 1.6 or higher, an Android device can be used. The connection is disconnected.Ĭongratulations! You have successfully assigned an IP Address to the TSP100IIIW on Windows.Ĭonnecting/Setting TSP100IIIW on iOS/Android When the printer setting is completed the printer will print out a self-test page.

Select Save -> Configuration Printing -> Restart device.

Enter IP Address, Subnet Mask, Default GatewayĪ screen where you click and save the entered details will appear.

Do Not Execute “Save” at this time and proceed to the next step.

Enter SSID (your Wi-Fi name), Security, and Security Key (your Wi-Fi password)Ī screen where you can check and save the entered details will appear.

On the menu displayed on the left side of the setting screen: NOTE: For security purposes, it is recommended to change the password when using the printer. So, select OK to change the password or select cancel to not change the password. The following message will be displayed when using the default password. It will prompt for authentication so please type the following and click on Log In: Locate the main menu on the left side and click on Login. 169.254.1.1 or 192.168.10.1) into the address bar and the Web Configuration page will appear. Internet Explorer) and type the printers IP address (e.g. NOTE: It will take some time (about 1 minute) until connection is confirmed. Open the Wi-Fi panel and connect to the printer. This can be confirmed on the send page, Network Configuration, in the printer’s Self-test.Ĭonnecting/Setting TSP100IIIW on Windows.Ĭonfirm the printer has a ready LED light of solid blue.

The Mac Address can be found under “Current IP parameter Status” at the bottom of the sheetįor the initial setup, the printer provides a temporary IP address, which is either: 192.168.10.1 or 169.254.1.1. The printer’s SSID, is “TSP100III-XXXXXX”, where “XXXXX” are the last 6 digits of the printer’s Mac Address located on the printer’s self test. The printer’s MAC and IP Addresses are obtained printing a Self-Test by pressing the button while powering the power, only releasing when printing beguins. Important: Please take note of your wireless network SSID and password, as well as your printer’s MAC and IP Addresses.

#ANDROID AIRPORT UTILITY WINDOWS 10#

Supported Environments: iOS, Android, Windows 10 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 8.0 (32bit/64bit), Window 7 (32bit/64bit)

#ANDROID AIRPORT UTILITY HOW TO#

This application note shows how to manually setup the TSP100IIIW on a network and assign an IP Address with Windows, iOS and Android.

Android airport utility